Powerfully Built "Matrix" Frame

A Sturdy, King-sized Beast

 

Dual Z-axis Assisted by 4 Linear Rods

Extremely steady while carrying the print bed up and down. Virtually no layer shift.

5mm Thick Aluminum Alloy Heatbed

Holding exceptionally well against deformation and vibration.

 

Cutting-edge Step-servo Motor x 5

 

Incredibly Quiet While Printing Hard

The working noise of K2 Plus is only 45dB, which is credited to the virtue of step-servo motors, dynamically balanced fans, and a snug enclosure It is no louder than someone typing on a laptop PC, truly a creative machine you can work next to.

Blazing Speed, a New Record

For a large-format machine, 600mm/s is pretty fast, but that's not the whole story. Turbocharged by the step-servo motors, it can accelerate at a staggering 30000mm/s².

 

Active Belt Tensioning

Timing belts may get loose over time, leading to poor print quality and accuracy.
On the K2 Plus, the belt tension is checked and rigged actively by a pressure sensor instead of marhually. Now, belt tensioning is a thing you can forget about.

 

Automated Run-out & Sensor Filament Cutter

The steel-bladed cutter features a magnetic retraction mechanism for precise filament positioning and minimal waste, with an indicator to replace the filament when only one inch remains.

Next-gen Direct Drive Extruder

So Many Features Neatly Packed

 

40mm³/s High-flow Hotend

Powered by an 80W heater, the flow rate of ABS at 280℃ can reach 40mm³/s, 66% higher than the previous design.

Actively Heated Chamber & High-temp Nozzle with Hardened Steel Tip

 

 

Empowering More Use Scenarios & Phenomenal Print Quality, Every Time

 

Two Auxiliary Fans Set the Style Right Off

The part cooling airflow is nearly doubled with two auxiliary cooling fans installed on both sides of the chamber, ensuring model shapes and details are set before any stringing or warping occurs.

 

Dual Al Cameras and Many More Advanced Intelligence Has Your Back

 

Chamber AI Camera Keeps a Keen Watch

K2 Plus uses an Al camera on the chamber side to watch over spaghetti failure, foreign objects, idling, etc. It will alert you when an error occurs. It also supports real-time monitoring and time-lapse filming.

Toolhead Al Camera

Tunes the Flow Rate

 

Ingenious Anti-tilt Auto Leveling

K2 Plus features dual independently motorized Z-axes for automatic tilt reduction, strain gauge-based auto-leveling compensation, and a pro-level first layer capability that ensures a smooth and neat initial layer without manual intervention.

Smarter Software for a Seamless Workflow

The latest Creality OS will unlock the full power of your 3D printer. It features smart multi-filament management and allows for fire-tuning in expert mode or with root access. FLUIDD WebUI is also supported for your convenience.

 

User-friendly Like a Household Appliance

K2 Plus is pre-assembled, so you can use it right after unpacking and screen installation. Then, a boot-up quick guide covers self-tests.

Awesome Features Others May Not Offer

K2 Plus 3D Printer
Printing Technology: Fused Deposition Modeling
Build Volume: 350*350*350mm
K2 Plus Dimensions: 495*515*640mm
K2 Plus Net Weight: 35Kg
Printing Speed: <600mm/s
Acceleration: 30000mm/s²
Printing Accuracy: 100mm±0.1mm
Layer Height: 0.05-0.3mm
Extruder: Dual-gear direct drive extruder
Filament Diameter: 1.75mm
Nozzle Diameter: 4mm
Nozzle Temperature: ≤350°C
Heatbed Temperature: ≤120°C
Chamber Temperature: ≤60°C
Build Plate: Flexible build plate
Leveling Mode: Full-auto Leveling
XYZE Motor: Servo-step motor
File Transfer: USB Drive/Ethernet/WiFi
File Storage: 32GB EMMC
Wifi: 2.4GHz/5GHz
RFID Sensor in Printer: Included
Rated Voltage: 100-240V~ AC 50/60Hz
Display Screen: 4.3" color touch screen
Rated Power: 1200W
Supported Filaments: PLA/ABS/PETG/PA-CF/ PLA-CF/ PET/ASA/PPA-CF
Al Camera for Monitoring: Standard
Al Camera for Calibration: Standard
Power Loss Recovery: Yes
Auto Filament Relay: Yes
Filament Tangle Detection: Yes
Air Purifier: Yes
Input Shaping: Yes
Lighting kit: Yes
Active Bed Tilt Calibration: Yes
Active Belt Tensioning: Yes
Active Chamber Heater: Yes
RFID-tagged Filaments: Yes
Printable File Format: Gcode/3MF
Slicing Software: Creality Print 5.0 or newer versions
UI Languages: English/German/Spanish/French/Italian/ Portuguese/Russian/Turkish/Japanese/ Korean/Chinese